SUSPENSION

108 URETHANE SUSPENSION KIT

108 URETHANE SUSPENSION KIT BUSHINGS ONLY YOU WILL NEED TO REUSE YOUR EXISTING HARDWARE

US$347.76*

109 URETHANE SUSPENSION KIT

109 URETHANE SUSPENSION KIT BUSHINGS ONLY YOU WILL NEED TO REUSE YOUR EXISTING HARDWARE

US$661.86*

110 URETHANE SUSPENSION KIT

110 URETHANE SUSPENSION KIT BUSHINGS ONLY, YOU WILL NEED TO REUSE YOUR EXISTING HARDWARE

US$348.66*

111 RUBBER SUSPENSION KIT (EARLY)

20.34MM FRONT SWAY BAR BUSHING BUSHINGS ONLY YOU WILL NEED TO REUSE YOUR EXISTING HARDWARE

US$326.02*

111 RUBBER SUSPENSION KIT (LATE)

22MM FRONT SWAY BAR BUSHING BUSHINGS ONLY YOU WILL NEED TO REUSE YOUR EXISTING HARDWARE

US$326.02*

111 URETHANE SUSPENSION KIT (EARLY)

20.34MM FRONT SWAY BAR BUSHING URETHANE SUSPENSION KIT (EARLY) BUSHINGS ONLY YOU WILL NEED TO REUSE YOUR EXISTING HARDWARE

US$348.66*

111 URETHANE SUSPENSION KIT (LATE)

22 MM FRONT SWAY BAR BUSHING URETHANE SUSPENSION KIT (LATE) BUSHINGS ONLY YOU WILL NEED TO REUSE YOUR EXISTING HARDWARE

US$347.76*

112 URETHANE SUSPENSION KIT (EARLY)

22MM FRONT SWAY BAR

US$674.46*

112 URETHANE SUSPENSION KIT (LATE)

22MM FRONT SWAY BAR 112 URETHANE SUSPENSION KIT (LATE) BUSHINGS ONLY YOU WILL NEED TO USE YOUR EXISTING HARDWARE

US$661.86*

CLAMP

Large Clamp for Split Boot or Full Boot

US$14.03*

DRAG LINK

DRAG LINK W111 220SE HECKFLOSSE

US$290.00*

IDLER ARM REPAIR

IDLER ARM REPAIR KIT from Early 280SL W113 Chow in pic for reference FITS ALL 280SLs FROM CHASSIS # 000019 EXCEPT FOR 000091 & 000108. Is also used on the following chassis 107 108 109 111 113 114 115 116 123 126

US$36.26*

INNER CONTROL ARM SEAL

It is the inner control arm seal rings for 1950’s to 1970’s cars. Priced Each. There are 8 per Car

US$6.18*

KING PIN KIT

US$160.00* US$175.00* (8.57% saved)

LOWER CONTROL ARM KIT

US$105.00*

LOWER INNER ARM SHAFT KIT

NOT AVAILABLE AT THIS TIME.

US$395.00*

POWER STEERING BOX

EXCHANGE REBUILT BOX ASSY. WILL FIT ALL 6 CYL MODELS. 4.5 V-8s AVAILABLE UPON SPECIAL REQUEST 3.5 MODELS ARE NOT AVAILABLE. PLEASE PROVIDE VEHICLE I.D. NUMBER IN THE SHIPPING INSTRUCTIONS BOX AT CHECKOUT.

From US$775.00*

Details

RUBBER BUMPER

US$12.00*

RUBBER FRONT SWAY BAR END LINK BUSHING

URETHANE FRONT SWAY BAR END LINK BUSHING QTY NEEDED PER CAR MODEL W108 (250/280) W109 (300/6.3) W110 (190/200/230) W111 (220/250/280) W112 (300) W113 (230/250/280SL) 8 8 8 8 8 8

US$16.00*

RUBBER FRONT SWAY BAR TO FRAME

RUBBER FRONT SWAY BAR TO FRAME QTY NEEDED PER CAR MODEL W108 (250/280) W109 (300/6.3) W110 (190/200/230) W111 (220/250/280) W112 (300) W113 (230/250/280SL) Front sway bar to frame - 22mm 2 2 early 2 late Front sway bar to frame - 23.85mm 2 2 late Front sway bar to frame - 20.34mm 2 2 early 2 late NOTE: Before selecting a front sway bar frame bushing, please measure the bar diameter first. Use either a flexible tape or a pair of calipers as shown. Do not use a flat ruler. With Calipers With flexible tape If using an inch tape – take measurement and divide by 3.142 to get the diameter. To convert from inches to mm, simply multiply by 25.4. In both cases, this sway bar measures 24mm.

From US$12.50*

Details

SHOCK ABSORBER - FRONT

US$125.00*

SHOCK ABSORBER - FRONT

ORIGINAL BILSTEIN, 2 PER CAR

US$123.60*

SHOCK ABSORBER - REAR

ORIGINAL BILSTEIN, 2 PER CAR

US$125.00*

SHOCK ABSORBER - REAR

ORIGINAL BILSTEIN, 2 PER CAR

US$133.90*